The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan & tilt head.
|
The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
|
The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsable for easy transport, but you can also mount the Kessler Pocket Dolly™ to it, turning it into a…
|
The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
|
The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsable for easy transport, but you can also mount the Kessler Pocket Dolly™ to it, turning it into a…
|
The Philip Bloom Signature Series Pocket Dolly™ is a hybrid slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the adjustable arc diameter handle…
|
The Philip Bloom Signature Series Pocket Dolly™ is a hybrid slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the adjustable arc diameter handle…
|
KC-12/8 crane, V3 Mounting plate / base section, capatible with 16' Upgrade. 360 rotation,invertible camera platform, internal sleeve bearings, high grade 6061-T6 aluminum, precision made and held…
|
The ORACLE Controller is the best motorized head solution on the market, for under 1500 €.
|
The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan & tilt head.
|
The Kessler 18 ft Upgrade Kit will upgrade your 12 ft Kessler Crane to an 18 ft crane, giving a total reach of 13.5 feet.
|
V3 Mounting plate, 360 rotation, maximum stability and minimum wobble, constructed of high grade 6061-T6 aluminum, manual and automatic camera tilt control.
|
Kessler Crane, understands what it means to shoot on a tight budget without compromising your creative endeavor.
|
Revolutionary tripod system designed to support camera cranes/jibs. The K-Pod™ was designed to be the best tripod system for your camera crane / jib, but it is also an excellent tripod to shoot from,…
|
Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track? The Pocket Dolly™ is the solution for those shots!
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Keeper / Grabber Wheel Kit is used to hold your Shuttle Pod to the rails, when using in an inclined or inverted configuration.
|
The Shuttle Pod Outrigger Foot Kit is an adjustable foot support system that can be attached to the Shuttle Pod rail for our Kessler Crane when using as the rail system for your Shuttle Pod.
|
The Kessler KC-Lite 8.0 has been designed to be the best »economy« crane on the market.
|
The Kessler K-Flex Dolly Track is an extremely portable, seamless, flexible dolly track.
|
|
|
|
|
For the ultimate shot enthusiast, Kessler Crane® provides a 12 foot upgrade. Combine this extension kit with your 5 1/2 foot crane and the long tip or your 8 foot crane to convert your Kessler Crane®…
|
Turn your 4 foot Shuttle Pod Rail Starter Kit into a 8 foot length, or add multiple extensions to extend the rail length longer.
|
The ElektraDRIVE BASIC Controller is for use with the ElektraDRIVE motor configurations for the Pocket Dolly or CineSlider, when the advanced features of our ORACLE Controller are not needed.
|
The 1000:1 motor would be used when ultra slow movements are desired. This motor would move at approximately half the speed of the 500 Series Motor.
|
The 50:1 motor would be used when extremely fast movements are desired.This motor would move at approximately twice the speed of the 100 Series motor.
|
Hardshell case with custom waterjet cut foam insert will hold Revolution Pan/Tilt Head, ORACLE Controller, 3 elektraDRIVE motor pods, 2 elektraDRIVE mounts, battery pack, cables and small…
|
The 100 Series motor is the suggested normal use motor for the Pocket Dolly or very fast motor for the CineSlider. This motor has less torque than the 200 or 500 Series motors.
|
The 200 Series motor is the suggested Time Lapse (slow) motor for the Pocket Dolly, and the suggested normal use motor for the CineSlider.
|
The 500 Series motor is the suggested Time Lapse (slow) motor for the CineSlider and would be the very slow Time Lapse motor for the Pocket Dolly and has the most torque of the 3 main motors.
|
|
This extension tip provides the piece needed to complete the conversion of the 5 1/2 foot Kessler Crane® to the 8 foot model.
|
A sturdy adjustable foot system for the Philip Bloom Pocket Dolly, CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two.
|
If you already have our standard Track Dolly Trucks and would to upgrade to our premium wheels, you can order the premium wheel upgrade (12 wheels).
|
Make your transportation easier with the newly redesigned Kessler Crane® Soft Case! This case is custom made for the Kessler Crane®. The new model has a rigid Masonite padded floor.
|
The Push/Pull Handle securely mounts to the leg of the K-Pod to allow you to push or pull a camera operator, when using the K-Pod as a dolly.
|
First, it is an adjustable custom made seat using the K-Pod™ as a dolly on our K-Flex Track. Secondly, give you a second, adjustable postion to mount a tripod head.
|
This case is custom made for the Kessler K-Pod™. The case has a rigid Masonite padded floor and the foam lined top and sides keep their soft shape and ensure the protection of your equipment.
|
This is a custom case for the Pocket Jib. It is very handy for transportation purposes.
|
No longer struggle to see your LCD display or reach your zoom/focus controls while operating your crane. With the Kessler Rear Control Center, you can easily mount your display‡, as well as…
|
If you have purchased our 8’ or 12’ crane model, using this tip will give you the 5.5 ft option. The short tip will give you a 3’ drop and equal lift for a total of six feet of camera travel.
|
Kessler 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud). NOTE: Optional M10 Knob. For fluid heads with metric M10 threaded stem/stud like Sachtler, Cartoni, etc.
|
6" dual-locking nomadic "All- Terrain" wheels for the K-Pod System™. These wheels are for use on rough terrain, like gravel or in a yard.
|
|
|
|
The elektraDRIVE Mount for the CineSlider allows you to mount one of the elektraDRIVE Motor Pods to the CineSlider.
|
The elektraDRIVE Mount for the Pocket Dolly allows you to mount one of the elektraDRIVE Motor Pods to the Pocket Dolly.
|
The K-Flex Case is the perfect way to transport your K-Flex Track to your shoots. The case has a rigid CORDURA® fabric wrapped shell, two side grab handles makes it easy to move one 50' roll of…
|
Our new 7" Idler Arm Upgrade for our K-Pod™ Track Dolly Trucks allow for improved operation when using the trucks on track that is not perfectly straight or parallel.
|
|
|
Standard 6" dual-locking caster wheels for the K-Pod System™. Set of 3.
|
Shuttle Pod Pedestal Feet are used to sit the Shuttle Pod on the ground when converting the Shuttle Pod to the winch system, or using as a low mount shooting platform.
|
This package will still allow you to use the factory weight bar for fine tuning as well as provide extra surface area for other accessories such as zoom control or a monitor. Extremely useful for…
|
Use the Ball Relocator to attach your 100mm ball to the end of your rig. The Relocator mounts to the camera basket using four wing bolts to allow leveling independent from the crane.
|
|
Convert your KC-Lite 8.0 from 8 foot length to 5.5 length with the KC-Lite 5.5 Short Tip Upgrade.
|
|
Kessler CineSlider 100mm Ball Mount
|
|
Add this cable support upgrade kit to your KC-8 crane for greater support and stability.
|
Easily transport your KC-Lite camera crane with our new KC-Lite Soft Case for the KC-Lite 8.0 Camera Crane. Case will hold KC-Lite 8.0 crane, as well as KC-5.5 Short Tip upgrade.
|
Kessler Pocket Dolly™ V2 Brake is used to lock carriage in place.
|
Use the Shuttle Pod Cross Brace when you need to add additional supports under your Shuttle Pod rail.
|
Tool-less Package Not a glorified wing nut! Upgrade your crane and add time and convenience to your shoot. Eliminate the need for tools by using these hand knobs making setup and tear down more…
|
Pushing the weight limits of the crane the Ultra Duty Control Rod is for you. Made especially for heavy weight load conditions.
|
|
|
Keep those troublesome cables out of the way with the Kessler Wheel Skirts. The Wheel Skits are compatible with the Kessler Standard Caster Wheels only.
|
|
|
When the Kessler Crane® is not in motion protect it from unwanted vertical movement with this braking system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100% stainless steel spiked feet for the K-Pod System™. Set of 3.
|
|
|
|
|
| |